To Prepare for Use
WARNING
To avoid electric shock, ensure that the instrument is correctly grounded.
5.3
Turn-on Checkout
After the instrument is connected to the power source, press the power switch
the lower-left corner of the front panel to power on the instrument. During the start-
up process, the instrument performs a series of self-tests. After the self-test, the
splash screen is displayed.
•
Restart: Click or tap
reboot?" is displayed. Click or tap OK to restart the instrument.
•
Shutdown:
-
-
-
-
14
Figure 5.2 Connecting to Power
> Restart. Then a prompt message "Are you sure to
Click or tap
> Shutdown. Then a prompt message "Are you sure to
shutdown?" is displayed. Click or tap OK to shut down the instrument.
Press the power switch
shutdown?" is displayed. Click or tap OK to shut down the instrument.
Press
twice to directly shut down the instrument.
Press
for three seconds to directly shut down the instrument.
and a prompt message "Are you sure to
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
at