Advertisement
Quick Links
CSA20-67-DIN
COMPONENTS
BEFORE ASSEMBLING YOUR ANTENNA PLEASE ENSURE THAT ALL THE COMPONENTS BELOW ARE
INCLUDED IN THE KIT.
M-8564
SCREEN CENTRE
QTY: 1
LARGE CLAMP PLATE
QTY: 4
M6 FLAT WASHER
M6x65 HEX HEAD BOLT
M6 FLAT WASHER
M6 SPRING WASHER
M6 HEX NUT
M6x65 BOLT ASSEMBLY
QTY: 24
INS-40101-4
M-8564
SCREEN SIDES
QTY: 2
CORNER BRACKET
QTY: 8
M12 STUD ASSEMBLY
QTY: 4
www.bird-technologies.com
0A-20-67-DIN
DIPOLE ASSEMBLY
QTY: 1
M12 HEX NUT
M12 SPRING WASHER
M12 FLAT WASHER
M12x250 THREADED ROD
406-512 MHz
PAGE 1 OF 4
©RF Industries Pty Ltd 2009
Advertisement
Related Manuals for RFI CSA20-67-DIN
Summary of Contents for RFI CSA20-67-DIN
- Page 1 406-512 MHz CSA20-67-DIN COMPONENTS BEFORE ASSEMBLING YOUR ANTENNA PLEASE ENSURE THAT ALL THE COMPONENTS BELOW ARE INCLUDED IN THE KIT. 0A-20-67-DIN DIPOLE ASSEMBLY M-8564 M-8564 QTY: 1 SCREEN SIDES SCREEN CENTRE QTY: 2 QTY: 1 LARGE CLAMP PLATE CORNER BRACKET...
- Page 2 406-512 MHz CSA20-67-DIN ANTENNA ASSEMBLY STEP 1: ASSEMBLE THE 2 SIDE SCREENS TO THE CENTRE SCREEN AS DEPICTED BELOW USING THE 8 CORNER BRACKETS AND THE 16 M6x65 BOLT ASSEMBLIES INCLUDED IN THE KIT. TIGHTEN THE M6 BOLTS TO 15Nm (11 lbf.ft)
- Page 3 406-512 MHz CSA20-67-DIN ASSEMBLY INSTRUCTIONS continued STEP 3: WITH THE ANTENNA ASSEMBLY LOCATED ON THE MOUNTING TUBE ATTACH THE REMAINING 2 LARGE CLAMP PLATES AND TIGHTEN THE M12 NUTS CLAMPING THE ANTENNA ASSEMBLY TO THE MOUNTING TUBE. TIGHTEN TO 55Nm (40 lbf.ft)
- Page 4 406-512 MHz CSA20-67-DIN ASSEMBLY INSTRUCTIONS continued TYPICAL INSTALLATION THESE ITEMS NOT INCLUDED IN ANTENNA KIT: TOWER SCREENED ARRAY ASSEMBLY OUTRIGGER CSA-20-41-DIN TOWER CLAMPS MOUNT POLE STRAIN RELIEVE FEED CABLE BACK TO SUPPORT STRUCTURE. SEAL CONNECTOR WITH A SUITABLE SELF AMALGAMATING TAPE.
Need help?
Do you have a question about the CSA20-67-DIN and is the answer not in the manual?
Questions and answers