RoboLabs Monster User Manual page 2

Safety requirements
This is the safety alert symbol. It is used to alert you to
potential physical injury hazards. Obey all safety messages
that follow this symbol to avoid possible injury or death.
• Not grounded equipment can cause electric shock.
Power outlet MUST HAVE proper grounding to avoid
electric shock.
• Using excessive water during cleaning can cause
short circuit and electric shock. DO NOT USE exces-
sive water or water jet for cleaning. DO NOT SPILL
water on electric panels or parts.
• ALWAYS unplug equipment before cleaning or ser-
vicing.
• No user serviceable parts inside. DO NOT OPEN
electric panel unless you are qualified for this.
• Improper installation, adjustment, alteration, ser-
vice or maintenance can cause property damage,
injury, or death! Read and understand this manual
before installing, servicing, and operating this ma-
chine.
• Any modification to the machine design will void the
warranty, and may cause machine fault and/or dan-
gerous condition. DO NOT MODIFY the design of the
machine.
• Spinning head is very hot while in operation.
DO NOT TOUCH until it cools down.
DANGER
DANGER
WARNING
2