Prorack PR3600 Quick Start Manual

First Time Installation

• Please read instructions carefully before installation.
• Check the contents of kit. Contact your Prorack dealer if any parts appear to be missing or damaged.
• Clean your roof racks prior to fitting the basket.

Important Warning

• It is critical that all Prorack racks and accessories be properly and securely attached to your vehicle. Improper
attachment could result in an automobile accident, and could cause serious bodily injury or death to you or to others.
• You are responsible for securing the racks and accessories to your car, checking the attachments prior to use, and
periodically inspecting the products for adjustment, wear, and damage.
• If you do not understand all of the instructions and cautions, or if you have no mechanical experience and are not
thoroughly familiar with the installation procedures, you should have the product installed by a professional installer
such as a roof rack specialist.
BlockHead attaches securely to flat surfaces. Recommended Mounting Hardware
includes 6 mm (1/4") bolts or screws, fender washers, and locking nuts
1
Remove the skewer from the block by
loosening the nut
6100010838 Rev1
Bike Fork Mount Carrier
2
Use the template below to scribe two
drilling points
• Use 6 mm (1/4") mounting hardware.
• Always check handlebar clearance before
attaching block.
Page 1 of 3