Features - Cerio PS-200N-AX User Manual

CPE + Repeater AP Mode
It can be used as an Outdoor Customer Premises Equipment (CPE) to receive wireless signal

over last mile application, helping WISPs deliver wireless broadband Internet service to
residents and business customers
In the CPE mode, PS-200N-AX is a gateway enabled with NAT and DHCP Server functions.

The wired clients connected to PS-200N-AX are in different subnet from those connected to
Main Base Station, and, in CPE mode, it does not accept wireless association from wireless
clients.

1.4 Features

Operation Modes : AP Mode, WDS Mode, Client Bridge + Repeater AP Mode and WISP

Repeater + AP Mode
500mW at 5Ghz Output High Power

IEEE 802.11a/n 2Tx / 2Rx Design, Bandwidth of up to 300Mbps(Tx), 300Mbps(Rx) link rate

Maxmum Security with 802.1X, WAP, and WPA2

Support Over load current protection for the board design . and 3 LEDs Wireless Signal

Strength
Weater-Proof RJ45 Connector, Integragted Power over Ethernet (PoE)

CERIO software core : cen_v3.0