External Network Connection ( Network Requirement ); Configure Ps-200N-Ax Lan Ip Address - Cerio PS-200N-AX User Manual

4.2 External Network Connection ( Network Requirement )

It can be used as an Client Bridge or Repeater AP to receive wireless signal over last mile
applications, helping WISPs deliver wireless broadband Internet service to new residential and
business customers. In this mode, PS-200N-AX is enabled with DHCP Server functions. The
wired clients of PS-200N-AX are in the same subnet from Main Base Station and it accepts
wireless connections from client devices.
When the PS-200N-AX configured as an Access Point and Client Station simultaneously, the
Wireless General and Advanced Setup also used simultaneously. But the Security Type can
be different. In the other word, the channel or other settings will be the same between
PS-200N-AX to Main Base Station and wireless client to PS-200N-AX , but security type can
be different.

4.3 Configure PS-200N-AX LAN IP Address

Here are the instructions for how to setup the local IP Address and Netmask. Please click on
System -> LAN and follow the below setting.
CERIO software core : cen_v3.0