Table of Contents
Advertisement
Hidden SSID : By default, it's "Disable". Enable this option to stop the SSID broadcast in
your network. When disabled, people could easily obtain the SSID information with the site
survey software and get access to the network if security is not turned on. When enabled,
network security is enhanced. It's suggested to enable it after AP security settings are
archived and setting of AP clients could make to associate to it.
Client Isolation : By default, it's "Disable". Select "Enable", all clients will be isolated from
each other, which means they can't reach each other.
IAPP : Inter Access-Point Protocol is designed for the enforcement of unique association
throughout a ESS(Extended Service Set) and for secure exchange of station's security
context between current access point (AP) and new AP during hand off period.
Maximum Clients : The default value is 32. You can enter the number of wireless clients that
can associate to a particular SSID. When the number of client is set to 5, only 5 clients at
most are allowed to connect to this VAP.
Security Type : Select the desired security type from the drop-down list; the options are
Disable, WEP, WPA-PSK, WPA2-PSK, WPA-Enterprise, WPA2-Enterprise and WEP
802.1X.
Disable : Data are unencrypted during transmission when this option is selected.
WEP : Wired Equivalent Privacy(WEP) is a data encryption mechanism based on a 64-bit
or 128-bit shared key.
Key Index : Skey index is used to designate the WEP key during data transmission.
4 different WEP keys can be entered at the same time, but only one is chosen.
WEP Auth Method : Enable the desire option among OPEN or SHARED.
CERIO software core : cen_v3.0
Advertisement
Table of Contents
