Cerio PS-200N-AX User Manual page 24

5ghz 11na 500mw 300mbps high power soho ap bridge
Table of Contents

Advertisement

3) DNS  If you don't know for your ISP correct DNS IP address, Please click "No default
DNS server" to follow your ISP DNS related IP address.
4) Wireless Setup  If you are not sure which setting to choose, Please then the default
setting to best WiFi smart channel judgment for auto channel, and adjust the output
power to level9 (100%) Extended service set ID indicated the SSID which the clients used
to connect to the access point ESSID.
5) Wireless Security setup  Suggested setting that you use wireless encryption
authentication type for security Type : to "WPA2-PSK" the cipher suite : to "AES", Key
Type : to "ASCII" for 11n high speed mode.
Pre-shared Key : Enter the information for pre-shared key; Pre-shared key can be either
entered as a 256-bit secret in 64 HEX digits format or 8 to 63 ASCII characters. The
Pre-Shared key sample as "12345678" wireless encryption key for wireless access.
CERIO software core : cen_v3.0

Advertisement

Table of Contents
loading

Table of Contents