Software Configuration; Example Of Segment: (Windows 7) - Cerio PS-200N-AX User Manual

1.7 Software Configuration

PS-200N-AX supports web-based configuration. Upon the completion of hardware installation,
PS-200N-AX can be configured through a PC/NB by using its web browser such as Internet
Explorer 6.0 or later.
Default IP Address: 192.168.2.254

Default Subnet Mask: 255.255.255.0

Default Username and Password

MODE
Management Account
Username
Password
IP Segment Set-up for Administrator's PC/NB

Set the IP segment of the administrator's computer to be in the same range as PS-200N-AX for
accessing the system. Do not duplicate the IP Address used here with IP Address of PS-200N-AX
or any other device within the network.

Example of Segment: (Windows 7)

Step 1 :
Please click on the computer icon in the bottom right window, and click "Open Network and
Sharing Center"
Step 2 :
In the Network and Sharing Center page, Please click on the left side of "Change adapter
setting" button
AP , WDS , ( WISP / Client Bridge )+ Repeater AP
Root Account
root
default
CERIO software core : cen_v3.0
Admin Account
admin
admin