Table of Contents
Advertisement
Manual – Click the "Connect" button on "WAN Information" in the Overview page
to connect to the Internet.
Idle Time : Time to last before disconnecting PPPoE session when it is idle. Enter
preferred Idle Time in minutes. Default is "0", indicates disabled. When Idle time is
disabled, the "Reconnect Mode" will turn out "Always on"
MTU : By default, it's 1492 bytes. MTU stands for Maximum Transmission Unit.
Consult with WISP for a correct MTU setting.
PPTP : The Point-to-Point Tunneling Protocol (PPTP) mode enables the
implementation of secure multi-protocol Virtual Private Networks (VPNs) through
public networks.
IP Address : The IP address of the WAN port
IP Netmask : The Subnet mask of the WAN port
PPTP Server IP Address : The IP address of the PPTP server
User Name : Enter User Name for PPTP connection
Password : Enter Password for PPTP connection
Reconnect Mode :
Always on – A connection to Internet is always maintained.
On Demand – A connection to Internet is made as needed.
When Time Server is enabled at the "On Demand" mode, the
"Reconnect Mode" will turn out "Always on"
CERIO software core : cen_v3.0
Advertisement
Table of Contents
