5.3 REMOVING AND REASSEMBLING THE OVEN DOOR
1
Saddle
bracket
2
3
5.4 MAINTENANCE
Replacing the Oven Light
We recommend you have the oven light changed by an authorised technician. The
rating of the new lamp should be 230V, 25 Watt, Type E14.
- Unplug the cooker and make sure it has cooled down properly.
- Remove the lid in front of the light.
- Take the old bulb out.
- Insert a new bulb that has a heat resistance of 300°C.
- Put the protective lid back in front of the light.
To remove the oven door;
•
•
position(2).
•
the full closed position as shown in 3
figure and remove the door by pulling it
towards yourself.
Recessed
form
NOTE: To re-assemble the door follow the
opposite
rules of removal.
!
recessed forms should be positioned
properly on the hinge counterparts as
shown on 2 figure.
Open the oven door(1).
Open the saddle bracket up to end
Close the door till it almost reaches to rd
Please pay attention that the
nd
20