Alcolizer HH4 User Manual

For more information, please visit alcolizer.com
Hide thumbs Also See for HH4:

Advertisement

Quick Links

Alcolizer HH4 Alcohol Tester
User Manual
Di
Disclaimer – External Documents note to reader
The g/210L BrAC reading obtained by correct use of this device is only considered accurate at the time of
testing. Great care has been taken to ensure the accuracy of each reading.
Neither the manufacturer, the distributor, nor the owner accepts liability or responsibility due to any action
or claim arising from the reading produced by this device, whether used correctly or incorrectly.
REF: Alcolizer HH4 Alcohol Tester User Manual V8.docx
Page 1
© Alcolizer Technology

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HH4 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Alcolizer HH4

  • Page 1 Neither the manufacturer, the distributor, nor the owner accepts liability or responsibility due to any action or claim arising from the reading produced by this device, whether used correctly or incorrectly. REF: Alcolizer HH4 Alcohol Tester User Manual V8.docx Page 1...
  • Page 2: Table Of Contents

    Back Operation ......................19 Shutting Down ......................19 Test Options Menu ......................20 Test Cancel ........................ 20 Test Refusal ....................... 20 Setup Menu ........................22 Date & Time ....................... 22 REF: Alcolizer HH4 Alcohol Tester User Manual V8.docx Page 2 © Alcolizer Technology...
  • Page 3 10 Calibration ........................39 10.1 Calibration Alerts ....................... 39 10.2 Calibration Process ....................39 11 Specifications ........................40 12 About Screen ........................41 13 Splash Screen Display ....................... 41 REF: Alcolizer HH4 Alcohol Tester User Manual V8.docx Page 3 © Alcolizer Technology...
  • Page 4: Introduction

     Bluetooth Printer (Optional) 2.2 Device Overview The HH4 is a handheld device consisting of a hard-plastic case, rubberised hand grip, wrist strap and the following user displays, buttons, and adaptor sockets. (Refer to Figure 1)  Mouthpiece Locator and Sample Inlet Spigot ...
  • Page 5: Test Key

     Various Test Modes (Mouthpiece, Passive Standard and Passive Only)  Extensive menus and options  Ready Notification  Blow Notification including progress bar  BrAC Level in various formats  Printer Setup  Records Information REF: Alcolizer HH4 Alcohol Tester User Manual V8.docx Page 5 © Alcolizer Technology...
  • Page 6: Mouthpiece Locator And Sample Inlet Spigot

    Note The HH4 has optional functions which may or may not be active on your device. The screen images shown in this User Manual may differ to your device depending on the options fitted or functions enabled.
  • Page 7: Cleaning Requirements

    To permanently display this information, hold the Test key down upon start up.  The Display will show press to test (Refer to Figure 3). Figure 3 - Press To Test Message REF: Alcolizer HH4 Alcohol Tester User Manual V8.docx Page 7 © Alcolizer Technology...
  • Page 8: Charging The Battery

    CAUTION The battery in the HH4 device is a Li-ION battery. As such it should not be tampered with in anyway. Should any problems occur that are related to the battery, contact your local Alcolizer representative for advice.
  • Page 9: Testing Types

    Note Mouthpiece testing is also referred to as Standard or Active testing. 2.6.1 Mouthpieces There are two types of Mouthpieces available for use on the HH4 (Refer Figure 5). Mouthpiece Types:  Spit Trap Non-Return Valve Mouthpiece (2 variants), and ...
  • Page 10: Taking A Mouthpiece (Active) Breath Sample

    If the self-check is unsuccessful an error code will be displayed, and the device will not accept a breath sample.  Blow will be displayed when the device is ready (Refer to Figure 8). REF: Alcolizer HH4 Alcohol Tester User Manual V8.docx Page 10 © Alcolizer Technology...
  • Page 11 (Refer to Figure 10). A beeping sound is also heard during the breath sample delivery phase, indicating a satisfactory breath sample is being delivered. Figure 10 - Sample Process Bar REF: Alcolizer HH4 Alcohol Tester User Manual V8.docx Page 11 © Alcolizer Technology...
  • Page 12: Analysing A Mouthpiece Breath Sample

    0.019 g/210L BrAC, yellow for 0.020 g/210L BrAC to 0.049 g/210L BrAC and red for readings greater than 0.050 g/210L BrAC. The Recovering period is indicated by Recovering shown on the display (Refer to Figure 13a) REF: Alcolizer HH4 Alcohol Tester User Manual V8.docx Page 12 © Alcolizer Technology...
  • Page 13: Passive Testing

    Figure 13b – Overrange Results 2.6.5 Passive Testing Passive testing is a test that is performed without using a mouthpiece. The HH4 can perform two types of passive testing, that is trigged by button or blow pressure. All Passive testing is performed by holding the device approximately 50mm in front of the test subject’s mouth and asking them to count or talk so that exhaled breath may be picked up by...
  • Page 14: Taking A Passive Standard Breath Sample

    Perform a Passive Standard test as follows:  On the press test screen, press the Test key. Ready for passive test is displayed (Refer to Figure 16) REF: Alcolizer HH4 Alcohol Tester User Manual V8.docx Page 14 © Alcolizer Technology...
  • Page 15 The device will give three sample pump clicks, followed by a long beep sound. Analysing Sample will then be displayed (Refer to Figure 18). Figure 18 - Analysing Sample Message REF: Alcolizer HH4 Alcohol Tester User Manual V8.docx Page 15 © Alcolizer Technology...
  • Page 16: Analysing A Passive Breath Sample

     After the recovery period has ended, the device is enabled automatically to take an Active (Mouthpiece) sample (Refer to Figure 21). Perform an Active test in accordance with the procedures in section 3.4.2. REF: Alcolizer HH4 Alcohol Tester User Manual V8.docx Page 16 © Alcolizer Technology...
  • Page 17: Enabling Passive Only

    Pressure Activated or Passive Blow testing stands for the triggering method used on Passive testings. Enable the pressure activated as follows:  Press the Down button until Test Options is highlighted (Refer to Figure 22). REF: Alcolizer HH4 Alcohol Tester User Manual V8.docx Page 17 © Alcolizer Technology...
  • Page 18 Button/Blow Passive Trigger set both Passive testing to take a sample by pressing the test button or when a difference in pressure is detected. REF: Alcolizer HH4 Alcohol Tester User Manual V8.docx Page 18 © Alcolizer Technology...
  • Page 19: Back Operation

     Press the Test key and the display will return to the previous screen. 2.8 Shutting Down The HH4 will automatically shut down after a period of inactivity. Should the device be required to be shut down manually (e.g. to conserve battery life), perform the following procedures: ...
  • Page 20: Test Options Menu

    (Refer to Figure 28). The screen will then return to the press to test display. The test refusal will be recorded in Records. REF: Alcolizer HH4 Alcohol Tester User Manual V8.docx Page 20 © Alcolizer Technology...
  • Page 21 Alcolizer HH4 Alcohol Tester User Manual Figure 28 - Test Refused Displayed REF: Alcolizer HH4 Alcohol Tester User Manual V8.docx Page 21 © Alcolizer Technology...
  • Page 22: Setup Menu

    4 Setup Menu To access the setup menu, perform the following procedures:  Switch the HH4 device on (refer to paragraph 2.8).  With the screen displaying press to test, Press the Up and Down buttons simultaneously for approximately five seconds. The menu screen will be displayed during this process and then the password set-up code ‘00000000’...
  • Page 23 Use the up and down buttons to adjust to your requirements, press the Test Key to accept.  Repeat for the day then press the Test Key to accept. REF: Alcolizer HH4 Alcohol Tester User Manual V8.docx Page 23 © Alcolizer Technology...
  • Page 24: Printing Function

    Alcolizer HH4 Alcohol Tester User Manual 5 Printing Function The printing function (if installed) enables the printing of records by connecting the HH4 to a portable printer via Bluetooth connection. The device supports the following printers:  SPRT SP-T7  Confucian 200-BU ...
  • Page 25: Bluetooth Printer Pin

     Use the Up or Down buttons to display the first number of the PIN, e.g. 0.  Press the Test key to advance to the next number. REF: Alcolizer HH4 Alcohol Tester User Manual V8.docx Page 25 © Alcolizer Technology...
  • Page 26: Pairing The Printer

     Select the up button once and use the test key to select Pairing (Refer to Figure 37). Figure 37 - Pairing Selected  Place the HH4 device next to the Bluetooth printer and switch the printer on. Press the test key and he HH4 will search for the printer and display Searching… (Refer to Figure 38).
  • Page 27 User Manual NOTE The HH4 will search and display all Bluetooth devices in range. To avoid attempting to connect to a device other than the intended printer, move other Bluetooth items away. When the HH4 identifies the printer, the printer type will be displayed, e.g. “SPP-R200”...
  • Page 28: Printer Driver

     When Bluetooth is enabled, a Bluetooth icon is visible on the screen at all times (Refer to Figure 44). Figure 44 - Bluetooth Icon on Screen REF: Alcolizer HH4 Alcohol Tester User Manual V8.docx Page 28 © Alcolizer Technology...
  • Page 29: Auto Print

     None – regardless of results: nothing transmitted. To set the HH4 to Auto Print Standard, scroll down until Auto Print Standard is highlighted. Positive is the default option. To select All or None, press the Test key until the desired option is highlighted.
  • Page 30: Auto Print Passive

     None – regardless of results: nothing transmitted. To set the HH4 to Auto Send Passive, scroll down until Auto Print Passive is highlighted in a similar manner to Auto Send Passive. Positive is the default option. To select All or None, press the Test key until the desired option is highlighted.
  • Page 31: Pairing As Serial Device

    Figure 47 - Pairing Selected NOTE The HH4 will search and display all Bluetooth devices in range. To avoid attempting to connect to a device other than the intended printer, move other Bluetooth items away.  Select the Bluetooth device which HH4 require to be paired (Refer to Figure 48).
  • Page 32: Pairing To Onsite Testing Mobile App

    Alcolizer HH4 Alcohol Tester User Manual  Press the test key to pair HH4 with device. Unit will display a PIN number sent by the computer in this case. Figure 49 - Printer Pairing...  Follow instruction on computer screen to confirm PIN so pairing is completed.
  • Page 33: Android

     From the OnSite Testing App, navigate to Settings >> Pairing NOTE The iOS device will not show up on the HH4. Pairing must be done from the iOS device. Pairing must also be done through the OnSite Testing app, not the iOS device’s Bluetooth settings ...
  • Page 34: Auto Send

    Alcolizer HH4 Alcohol Tester User Manual  From your android device, open the Bluetooth settings and pair to the HH4 as you would any other Bluetooth accessory. 6.6 Auto Send NOTE To ensure the correct operation of the Auto Send function, Auto Print Standard and Auto...
  • Page 35: Auto Send Passive

     None – regardless of results: nothing transmitted. To set the HH4 to Auto Send Passive, scroll down until Auto Send Passive is highlighted. Positive is the default option. To select All or None, press the Test key until the desired option is highlighted.
  • Page 36: Keep Previous

     Arrow Up or Down to ‘Back’ to Return to the User Menu Use the Test Key to select Yes or No. If Yes is selected in the Keep Previous function the HH4 will display the last test record in the top of the screen.
  • Page 37: Area Code

    Figure 54 - Area Code Set The Area Code is now set. Press the Down button until Back is displayed. Press the Test Key to return to the press to test screen. REF: Alcolizer HH4 Alcohol Tester User Manual V8.docx Page 37 © Alcolizer Technology...
  • Page 38: Records

    The device provides a series of warnings regarding memory capacity including memory reaching capacity, memory full and days since the memory has been full. Figure 56 - Memory Capacity Warnings REF: Alcolizer HH4 Alcohol Tester User Manual V8.docx Page 38 © Alcolizer Technology...
  • Page 39: Calibration

    User Manual 9 Calibration 9.1 Calibration Alerts The Alcolizer HH4 requires calibration every twelve months as per Australian Standards Certification Requirement. The device will display a warning message after switching on if 14 days or less remain before calibration is required (Refer to Figure 57).
  • Page 40: Specifications

    User Manual The Serial Number of the instrument, your Purchase Order number if you have an account with us, or credit card details will be required. Then post your Alcolizer HH4 to our Service Centres in Cleveland or Perth.  Unit 9/ 132-140 Ross Court, Cleveland QLD 4163 ...
  • Page 41: About Screen

    3. Press and release the test key to turn on the device. 4. Observe that the splash screen is retained on the screen for a duration of 2 seconds REF: Alcolizer HH4 Alcohol Tester User Manual V8.docx Page 41 © Alcolizer Technology...

Table of Contents