LOGICDATA COSMO Austin Owner's Manual page 18

STEP 8: CONNECTING THE POWER CABLE
1
2
NOTICE
Stretching the Power Cable may damage it. This may lead to malfunctions with the Bed Frame.
NOTICE
Ensure the Cable is plugged into the mains properly. Bad connections can damage the system.
NOTICE
If the Bed Frame is too close to the wall (or touching it), it may collide during movement. To avoid
damage to the Bed Frame and the wall, ensure a small distance is kept.
18 //ADJUSTABLE BED FRAME - OWNER'S MANUAL
1. Connect the Power Cable from
the Control Box to the cable
of the Power Converter (J).
2. Connect the second Power Ca-
ble to the Power Converter, then
to the mains.
3. Lay the Power Cable along the
wall behind the Bed Frame to
minimize the risk of tripping.