Table of Contents
Advertisement
Chapter 3. Operation
M
ENU
A
LARM
T
EST
S
TATE
S
TATUS
O
NLINE
N
R
O
ESPONSE
E
MPTY
3-4
Displays additional status and configuration menus for the selected module.
To access the submenus for this item, use the arrow keys to scroll to the
column for the module you want to edit, and press
M
ENU
information on each submenu item, see the section Octal E&M Module Menu
Options on page 3-5.
Read security: 5
Displays an alarm condition on the module. Press
vate the menu.
Read security: 5
Displays the test name if the module is executing a test. Press
field to activate the menu. Tests include T
and L
. See Test on page 3-6 for a description of each test and its
OOPBACK
options.
Displays module status as either O
is physically installed, it must be marked as O
available resource. This parameter allows an installed module to be marked
as O
, which may be useful in system troubleshooting. If you choose
FFLINE
O
, the module will not be in alarm condition, and will display
FFLINE
O
.
FFLINE
Once a module is installed, S
ATLAS 550 to use the module for any data bandwidth.
This read-only field provides status information on the Octal E&M Module.
The following messages may display:
The module is enabled, and is responding to the system controller's status
polls. This is the normal response of the system.
The Atlas 550 O
on any of the voice parts.
The module is enabled, but is not responding to the system controller's sta-
tus polls. This response indicates either a problem in the system or that the
module is not installed.
The system controller has not detected the presence of a module in the slot;
nor has a module been manually enabled for this option slot.
Octal E&M Module User Manual
Enter
2W, T
EST
X
or O
. Even though a module
NLINE
FFLINE
for it to be considered an
NLINE
must be set to O
TATE
LED illuminates green when a call is active
NLINE
. For detailed
Enter
in this field to acti-
in this
Enter
ABCD, 1
H
T
,
K
Z
ONE
for the
NLINE
61200313L1-1
Advertisement
Table of Contents
