Table of Contents
Advertisement
WARNING: Do not use this device in radioactive,
highly reactive or explosive atmosphere.
Do not use this device to process any explosive,
radioactive, highly reactive or explosive
atmosphere creating substances.
CAUTION: Product Maintenance:
Maintenance of product only permitted to be
performed by trained service staff using suitable
measuring and auxiliary equipment as well as
detailed service instruction.
Wear gloves, eye protection, masks and lab
coats while working on the system.
Routine checks:
1. Check all the hoses to ensure that they are secure.
Rotors and Rotor Blocks
Traditional Rotors for SPD210 Vacuum Concentrator*
Type
Description
1.5 - 2.0 ml
Microcentrifuge
Tubes
17x60 mm (5 ml)
12x75 mm
13x100 mm
Glass and Plastic
16x25 mm, 18x125 mm
Tubes
18x150 mm, 16x125 mm
16x125 mm
Centrifuge Tubes
50 ml conical (28x115 mm)
Flasks
100 ml pear-shaped flask
1-Dram vial (15x45 mm),
4 ml
Vials
20x60 mm, 20 ml
scintillation vial
Shallow well
Microwell Plates
Deep well (Shallow well)
*Requires purchase of adapter cat. no. RAD200.
10 |
Operation
2. Ensure all glass condensation flask in emptied, cleaned
and checked for crack before every run.
3. Clean the cover, cover seal and chamber with a soft lint
free cloth with one of the following:
•
Mild detergent solution
•
Diluted Methanol (50%)
•
Diluted Ethanol (50%)
WARNING: Burns due to hot device parts:
When the concentrator is set to a temperature of
60°C and above the rotor and the sample tubes
will be hot, do not touch the wall of the rotor
chamber, use suitable auxiliary to remove the
sample tubes.
No. of Tubes
Working Volumes (ml)
200
1.2 - 1.6
10
3.5
200
4
32
8
48
12
32
24
88
24
48
40
8
80
192
3
50
16
12
-
4
-
Rotor Part No
RH200-12
RH10-15
RH200-12
RH32-13
RH48-18-125
RH32-18-150
RH88-16-125
RH48-50U
RH8-200
RH192-15
RH50-28-60
MPTR12-210
MPTR8-210
SpeedVac™ SPD210
Advertisement
Table of Contents
