)
*
Flat top chain
Fig. 44: Lubricating points
10.4.15 Assembly instructions: Running direction of chain
Failure of the conveyor chain (fl at top chain / accumulation roller chain with
small parts protection)
Operating the chain against its running direction can result in conveyor chain
failure or even crashing. There is a risk of damage to property.
Make sure the chain is installed in the proper running direction.
Flat top chain
Fig. 43: Running direction of chain
10.4.16 Assembly instructions: Lubricating points
Failure of the conveyor chain (fl at top chain / accumulation roller chain)
Inadequate lubrication of the conveyor chain can result in conveyor chain failure
or even crashing. There is a risk of damage to property.
The conveyor chain used in this product comes lubricated.
Lubricate the conveyor chain before the commissioning with Structovis GHD
0 842 904 229, using 1–2 g oil/m of chain, then every 1,000 hrs with 2–3 g oil/m
of chain.
)
*
Accumulation roller chain
*) Also lubricate the sides of the fl at top chain (curve + section)
Due to the system, the lubricant may be discharged.
Maintenance and repair
NOTICE
Accumulation roller chain with small parts protection
NOTICE
Accumulation roller chain Vplus
3 842 563 834/2022-08, MIT: BS 2/C-..., BS 2/R-..., Bosch Rexroth AG
61/84