Replacing The Gear Motor: Bs 2/C-H, Bs 2/R-H, Bs 2/R-V+ 1200, Motor Mounting (Ma) = M - Bosch rexroth BS 2/C Series Assembly Instructions Manual

76/84 Maintenance and repair
Please note:
The gear motor can only
be exchanged completely.
A separation of motor and
gear is not permitted!
1. Remove the side
cover plates.
2. Remove the locking rings
from the hexagonal shaft.
3. Slide the hexagonal shaft
out of the drive.
Store the protective tube
for reuse.
4. Remove the fl ange
from the gear motor.
5. Mount the fl ange at the
new gear motor.
6. Assemble the gear motor
and tighten the screws
by hand.
7. Push the hexagonal shaft
into the drive.
While doing so, insert the
protective pipe.
Secure the hexagonal
shaft with locking rings.
8. If the gear motor
is centered by the
hexagonal shaft,
tighten the screws.
Bosch Rexroth AG, MIT: BS 2/C-..., BS 2/R-..., 3 842 563 834/2022-08
10.4.25 Replacing the gear motor: BS 2/C-H, BS 2/R-H, BS 2/R-V+ 1200,
motor mounting (MA) = M
2
4x
6
SW4
M = 7 Nm
D
7
Fig. 59: Replacing the gear motor, motor mounting (MA) = M
4 5 6 8
SW10
M = 8 Nm
D
1
2
3
8
4x
SW4
M = 7 Nm
D
563 833-66