Changing The Glide Profi Les; Bs 2/C-100 - Bosch rexroth BS 2/C Series Assembly Instructions Manual

Required accessories:
• Glide profi le (C)
1
– GP 2/H-ST )
(48 x L=3000 mm)
3 842 564 315
2
– GP 2/H-KS )
(24 x L=6000 mm)
3 842 564 314
• Guide profi le (D)
2
– FP 2/C/R )
(12 x L=6000 mm)
3 842 567 261
• Glide profi le (E)
2
– GP 2 ) (24 x L=6000 mm)
3 842 567 260
1
) ST = steel
2 ) KS = plastic
1. Remove the chain,
see chapter "Changing the
conveyor chain".
2. Clean the interior (X)
of the section profi le
thoroughly.
Please note:
Before removing the glide
profi les, thoroughly clean
the interior (X) of the
section profi le of grease,
dirt and other impurities.
Dirt in the slots (Y) prevents
the assembly of the glide
profi les in the correct position.
10.4.26 Changing the glide profi les: BS 2/C-100, ...-250, BS 2/C-H
E
Fig. 60: Changing the glide profi les: BS 2/C-100, ...-250 (shown), BS 2/C-H (1/2)
Maintenance and repair
.../C
X
3 842 563 834/2022-08, MIT: BS 2/C-..., BS 2/R-..., Bosch Rexroth AG
77/84
2
!
C
D
Y
563 833-81