Required And Supplementary Documentation; Presentation Of Information; Safety Instructions - Bosch rexroth SE 2/C Series Assembly Instructions Manual

1.2 Required and supplementary documentation


Only start up the product if the documentation marked with the
book symbol is available and you have understood and followed the
instructions in it.
Table 1: Required and supplementary documentation
Title
Employee safety training
Declaration of incorporation (AS 2/C-..., KU 2-...)
Declaration of incorporation (AS 2/R-...)
1
MTpro )
1
) Download at: www.boschrexroth.com/mtpro
2
) All documents are also available for download from the media directory:
www.boschrexroth.com/mediadirectory

1.3 Presentation of information

Standardized safety instructions, symbols, terms and abbreviations are used so
that you can use this documentation to work quickly and safely with your product.
These are explained in the following sections to help you understand them better.
1.3.1

Safety instructions

This document contains safety instructions in chapter 2.6 "Product-specifi c safety
instructions" and chapter 3 "General notes on property and product damage",
as well as before any sequence of actions or any required action which involves
a risk of personal injury or property damage. Be sure to observe all safety
precautions.
Safety instructions are set out as follows:
Type and source of danger!

Consequences of non-compliance

Measures to prevent danger

...
• Warning sign: Points out the danger
• Signal word: Indicates the severity of the danger
• Type and source of danger: Indicates the type and source of the danger
• Consequences: Describes the consequences of non-compliance
• Prevention: States how the danger can be avoided
About this documentation
Document number
3 842 527 147
3 842 358 232
3 842 358 415
3 842 539 057
SIGNAL WORD
3 842 358 737/2022-08, MIT: SE 2/C-..., SE 2/R-..., Bosch Rexroth AG
7/108
Document type
With spare parts list