64/108
Maintenance and repair
Bosch Rexroth AG, MIT: SE 2/C-..., SE 2/R-..., 3 842 358 737/2022-08
10.1 Cleaning and care
Failure of bearings
Applying grease-dissolving substances to the bearing points,
e.g. during cleaning, leads to bearing failure. There is a risk of damage to
property, and the service life may be reduced.
Keep degreasers or aggressive cleaning agents away from the bearings!
Only clean the product with a damp cloth.
Failure of the conveyor chain (fl at top chain / accumulation roller chain)
Insuffi cient lubrication or wetting of the conveyor chain with grease-dissolving
substances, e.g. during cleaning, can result in conveyor chain failure or even
crashing. There is a risk of damage to property.
Always comply with the maintenance intervals.
Keep a maintenance schedule.
Keep degreasers or aggressive cleaning agents away from the conveyor chain!
Only clean the product with a damp cloth.
10.2 Inspection
10.2.1
Conveyor chain (fl at top chain / accumulation roller chain)
Check the conveyor chain regularly for wear and suffi cient lubrication by
visual inspection.
10.3 Maintenance
10.3.1
Bearings
The bearings have lifelong lubrication and are maintenance-free under normal
conditions of use.
10.3.2
Gear
The gears are maintenance-free.
10.3.3
Motor
To ensure adequate cooling of the motors, regularly remove dirt and dust deposits:
• from the surface of the motor,
• from the intake openings on the fan hood,
• from between the cooling ribs.
The cleaning intervals depend on the ambient and operating conditions.
NOTICE