Assembly Instructions: Finding A Chain Lock With An Operable Chain - Bosch rexroth SE 2/C Series Assembly Instructions Manual

70/108 Maintenance and repair
Flat top chain
Fig. 52: Chain lock
Bosch Rexroth AG, MIT: SE 2/C-..., SE 2/R-..., 3 842 358 737/2022-08
10.4.5

Assembly instructions: Finding a chain lock with an operable chain

CAUTION!

Observe DIN EN ISO 13857 when you remove or replace safety guards and/or
bypass protective equipment.

Test runs with open paneling should only be performed by a person with
appropriate knowledge and experience using tip switches, and if there is no
possibility of interference from other switching devices.
1. On the side without motor, either remove the outer protective case half
(AS 2/C-100, ...-250, AS 2/R-300, ...-700) or the side cover plate
(AS 2/C-700, AS 2/R-1200, ...-2200, AS 2/R-V-1200, ...-2200).
2. Start the belt section with the jog switch until the chain lock appears on the
chain tensioner.
You recognize the chain lock:
– of the fl at top chain by the gray fl at chain with hole
– of the accumulation roller chain by the galvanized tab
1
)
2
)
Accumulation roller chain

1
).

2
).
2
)
Accumulation roller chain Vplus