Using The Remote Control; Selecting Audio Output Languages; Selecting Subtitle Languages - JBL CINEMA PROPACK 600 Owner's Manual

Using the Remote Control

To access the Setup Menu, press the Menu
Button on the remote. The Setup Menu
will appear on the video display screen as
shown in Figure 1. The left side of the screen
will show the various options, and the box
on the right side of the screen will show the
current defaults.
Figure 1
To navigate through the settings on the screen,
use the Buttons to scroll up or
/
down through the list of settings or the list of
options. Press the / Buttons
move back and forth between the list of settings
and the list of options for those settings. To
choose a specific option, use the
until it is highlighted. Press the Enter
Button to select the choice. When a
selection is made, you may confirm the choice
by checking to see that a black dot fills the
"radio button" circle next to the choice. This
filled circle, not the highlighted option, is the
active choice.

Selecting Audio Output Languages

The Audio Language option sets the default
choice for the language that will be played from
a DVD disc.
To select the language default, you must be
viewing the Setup Menu (Figure 1), which is
available by pressing the Menu Button
while the unit is in the Stop mode. Audio
Language Selection is the first option, so it will
automatically be highlighted in dark blue when
the Setup Menu is displayed.
To change the default language, press the
Button and note that the list of system
defaults will be replaced with a list of the
available options, as shown in Figure 2. The
current language choice will be indicated by
a filled-in circle on the list on the right side
of the screen.
Configuring the DVD600 DVD Changer
Figure 2
To change the default setting, press the
Buttons
/
is highlighted, and then press the Enter Button
. Note that the circle for your choice will
fill in, and the menu will return to the default
listings.
If you wish to change the default to a language
other than English, Spanish or French, press the
Buttons
/
on the bottom is highlighted. Consult the
Language Codes list on page 64 for the desired
language. Press the Enter Button
then enter the four-digit code from the list using
to
the Numeric Keys
Although your selection will be entered, the
word "Other" will appear on the default list.
Buttons
/
Note that when a default language is selected,
it will be used whenever that language is present
on the DVD disc being played. However, when
that language is not present, the language used
will be the one preprogrammed into the disc
itself. (Typically, that default will be English for
discs sold in Region 1, but the selection will
vary at the discretion of the disc's producer.)
Although the default will set the language that
will be used when a disc is first put into play,
the language may easily be changed at any time
by using the Audio Button
If you have no other changes to make after set-
ting this default, press the Menu Button
to remove the Setup Menu from the screen, or
press the Play Button
resume playback.

Selecting Subtitle Languages

The Subtitle Language option sets the default
choice for the language that will be displayed
when subtitles are turned on during DVD
playback.
To select the Subtitle Language default, you must
be viewing the Setup Menu (Figure 1), which is
available by pressing the Menu Button
while the unit is in the Stop mode. At the Setup
(Continued)
Menu, press the
Subtitle Language option is highlighted.
To change the default Subtitle Language, press
the Button
system defaults will be replaced with a list of
the available options, as shown in Figure 3. The
current subtitle language choice will be indicated
by a filled-in circle in the list on the right side of
the screen.
until the desired choice
Figure 3
until the "Other" line
To change the default setting, press the
Buttons
/
, and
is highlighted, and then press the Enter Button
. Note that the circle for your choice will fill
– .
,
in, and the menu will return to the default listings.
If you wish to change the subtitle default to a
language other than English, Spanish or French,
press the
"Other" line on the bottom is highlighted. Consult
the Language Codes list on page 64 for the
desired language. Press the Enter Button
and then enter the four-digit code from the list
using the Numeric Keys
Although your selection will be entered, the
word "Other" will appear on the default list.
Note that when a default subtitle language is
selected, it will be used whenever that lan-
guage is present on the DVD disc being played.
.
However, when that language is not present,
the language used will be the one prepro-
grammed into the disc itself. (Typically, that
default will be English for discs sold in
Region 1, but the selection will vary at the
58 10D
to begin or
discretion of each disc's producer.)
Although the default will set the language that
will be used when the disc is first put into play,
the language may easily be changed at any time
by using the Subtitle Button
If you have no other changes to make after set-
ting this default, press the Menu Button
to remove the Setup Menu from the screen, or
press the Play Button
resume playback.
Button until the
and note that the list of
until the desired choice
Buttons until the
/
,
– .
,
.
58
10D to begin or
47