Advertisement
Table of Contents
- 1 Read First
- 2 Speaker Placement
- 3 Front Speakers
- 4 Center Channel Speaker
- 5 Surround Speakers
- 6 Mounting Options
- 7 Wall Mounting
- 8 Connection Tips
- 9 Speaker Connections
- 10 Dolby* Digital or Dts (or Other Digital Surround Mode) Connection
- 11 Dolby Pro Logic - Line Level
- 12 Dolby Pro Logic - Speaker Level
- 13 Operation
- 14 Troubleshooting
- 15 Specifications
- Download this manual
Advertisement
Table of Contents
Related Manuals for JBL SCS300.7
Summary of Contents for JBL SCS300.7
- Page 1 ® SURROUND CINEMA SPEAKERS SCS300.7 OWNER’S GUIDE...
-
Page 2: Read First
READ FIRST! Important Safety Precautions! CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: To reduce the risk of electric shock, do not remove cover (or back). No user-serviceable parts inside. Refer servicing to qualified service personnel. CAUTION: To prevent electric shock, do not use this (polarized) plug with an extension cord, receptacle or other outlet unless the blades can be fully inserted to... - Page 3 THANK YOU FOR CHOOSING JBL For more than 50 years, JBL has been involved in every aspect of music and film recording and reproduction, from live performances to the recordings you play in your home, car or office. We’re confident that the JBL...
-
Page 4: Speaker Placement
The SCS300.7 speaker system may be used in 5.1-, 6.1- or 7.1-channel applica- tions. In 5.1-channel applica- tions, two of the surround... -
Page 5: Mounting Options
JBL dis- claims any liability for the selection of suitable floor stands and/or correct compat- On the wall. Wall brackets are included. -
Page 6: Wall Mounting
JBL disclaims any liability for the selection of mounting hardware and/or bracket installation. Be sure to follow these bracket assembly and instal- lation instructions carefully. -
Page 7: Connection Tips
(+) and (–) termi- nals. Most manufacturers of speakers and electronics, including JBL, use red to denote the (+) terminal and Molded Nut ™ while posi- tioning the speaker for the desired orientation. If the Molded Nut ™... -
Page 8: Dolby* Digital Or Dts (Or Other Digital Surround Mode) Connection
DOLBY* DIGITAL OR DTS (OR OTHER DIGITAL SURROUND MODE) CONNECTION SUBWOOFER RECEIVER LINE LFE OUT LEVEL Use this installation method for Dolby Digital, DTS or other digital surround processors: Use the line-level input jack marked “LFE” for the Low- DOLBY PRO LOGIC* (NON-DIGITAL) – LINE LEVEL Use this installation method for Dolby Pro Logic applica- tions (not Dolby Digital, DTS... -
Page 9: Dolby Pro Logic - Speaker Level
DOLBY PRO LOGIC (NON-DIGITAL) – SPEAKER LEVEL Use this installation method for Dolby Pro Logic applica- tions (not Dolby Digital, DTS or other digital processing), where the receiver/processor does not have a subwoofer output, or a volume-controlled preamp (line-) level output: Connect your receiver or amplifier’s front left and right speaker terminals to the left... -
Page 10: Operation
OPERATION Move the Master Power switch (marked “Power” å) to the “ • ” (On) position to use the sub- woofer. The SUB300 subwoofer will automatically turn on or go into standby (sleep) mode when left in the auto mode (“Auto/On”... -
Page 11: Troubleshooting
If the problem has fol- lowed the speaker, consult your dealer for further assis- tance or, if that is not possi- ble, visit www.jbl.com. If there is no sound from the center speaker: • Check all wires and con- nections between receiver/ amplifier and speaker. -
Page 12: Specifications
P R O D U C T L I N E : SURROUND CINEMA SPEAKERS SCS300.7 MODEL: Bring the thrill of live performance and movie sound DESIGN GOAL: to the home environment by calling on JBL’s professional engineering leadership. Titanium-laminate-dome tweeter, SATELLITE TYPE: sealed enclosure Bass-reflex enclosure SUBWOOFER TYPE: FreeFlow ™...