JBL CS6100 Owner's Manual

JBL CS6100 Owner's Manual

Cinema sound speakers
Hide thumbs Also See for CS6100:

Advertisement

®
JBL CINEMA SOUND
SPEAKERS
CS6100
OWNER'S GUIDE

Advertisement

Table of Contents
loading

Summary of Contents for JBL CS6100

  • Page 1 ® JBL CINEMA SOUND SPEAKERS CS6100 OWNER’S GUIDE...
  • Page 3: Important Safety Instructions

    IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with a dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
  • Page 4: Planning Your System

    THANK YOU FOR CHOOSING JBL For more than 60 years, JBL has been involved in every aspect of music and film recording and reproduction, from live performances to the recordings you play in your home, car or office. We’re confident that the JBL system you have chosen will provide every note of enjoyment that you expected –...
  • Page 5: Center Channel

    PLACEMENT Left and Right Front Channels For left and right front channels, place one satellite to the left and another to the right of the television, as shown in Figure 1. Since the speakers are magnetically shielded, you can place them very close to the TV without worrying about the magnetic field distorting the picture.
  • Page 6 WALL - MOUNTING THE SATELLITES AND CENTER CHANNEL The CS6100 satellites and center channel are designed to be mounted on the wall. There is a fixed-mount wall bracket and an adjustable wall bracket provided for each satellite and the center channel. Each speaker bracket will require up to four 1-1/2"...
  • Page 7: Center And Satellite Speaker Connections

    CENTER AND SATELLITE SPEAKER CONNECTIONS Turn Off All Power After placing the speakers, you are ready to connect your system. First, turn off all audio-system power. Use high-quality speaker wire to make your connections (#18-gauge speaker wire with polarity coding is included). For longer distances, #16-gauge or heavier wire is recommended.
  • Page 8: Subwoofer Controls

    SUBWOOFER CONTROLS Rear Panel Phase Switch LFE Input Line-Level Inputs Power Indicator LED Subwoofer-Level Control Power Switch Subwoofer Connections If you have a Dolby Digital or DTS receiver/processor with a ® ® low-frequency-effects (LFE) or subwoofer output: RECEIVER/PROCESSOR SUBWOOFER OR LFE OUTPUT 15' (4.5m) Subwoofer cable...
  • Page 9: Operation

    OPERATION Surround Modes When using the CS6100 speakers in a Dolby Digital or DTS home theater system, make sure all speakers are set to “Small” . In a Dolby Pro Logic ® home theater system, make sure the receiver’s center channel mode is set to “Normal.”...
  • Page 10: Specifications

    SPECIFICATIONS CS6100 SATELLITES Frequency Response (– 6dB): Recommended Amplifier Power Range: Sensitivity (2.83V @ 1 meter): Nominal Impedance: Crossover Frequency: High-Frequency Driver: Midrange Driver: Dimensions (H x W x D): Weight: CENTER Frequency Response (– 6dB): Recommended Amplifier Power Range: Sensitivity (2.83V @ 1 meter):...
  • Page 12 All features and specifications are subject to change without notice. JBL is a trademark of Harman International Industries, Incorporated, registered in the United States and/or other countries. Pro Sound Comes Home is a trademark of Harman International Industries, Incorporated. Dolby and Pro Logic are registered trademarks of Dolby Laboratories.

Table of Contents