Notes On Programmed Play - JBL CINEMA PROPACK 600 Owner's Manual

6. Press the Buttons
/
through the list of available chapters. Press the
Enter Button or Button
to the next selection area.
7. The blue highlighted box will now appear
in a column where the options are "Add,"
"Delete," "Play" and "Done." Since this is the
first selection to be entered, press the Enter
Button and note that the selected disc,
track, title and chapter will be added to the Play
List column over a beige highlighted area. The
blue highlight will return to the disc box to
allow you to enter additional selections by
repeating Seps 2 through 7.
8. Repeat the steps as needed, noting that the
selections will be added to the Play List up to a
maximum of 22 steps.
•
To delete an entry from the Play List, press
the and Buttons
/
the selection to be deleted is highlighted in
dark green with green numbers on the Play
List. Press the Enter Button
press the Button once, so that the
word Delete is highlighted. Press the Enter
Button and the selection will be deleted.
A selection may also be deleted by following
this step to highlight it in green and then
pressing the Clear Button
47
•
To insert an entry into a Play List that has
already been created, press the
Buttons until the place on the
Play List where you wish to insert a selection
is highlighted in dark green with green num-
bers. Press the Enter Button
press the Button once, so that the
word Insert is highlighted in blue, and
then follow Steps 2 through 7. When you
have entered the data for the selection, high-
light the word Insert in blue and press Enter.
9. When you have completed the Play List, you
may play the programmed selections by press-
ing the and Buttons
/
the word Play is highlighted in blue. Press the
Enter Button to begin playback of the
entire Play List. During Program Play, the
Program Indicator will light.
10. To exit from the programming screen, press
the Return Button .

Notes on Programmed Play

•
To stop the playback of a Programmed Play
List, press the Stop Button 61
Operating the DVD600 Changer
Programmed Play (Continued)
•
to scroll To cancel programmed Play Lists, press the
Clear Button
to move
•
To edit the contents of a Play List using the
Information Display
the on-screen display, follow these steps:
•
Press the Check Button
•
Press the Check Button
step through each of the programmed
items. The Program Sequence Number will
appear on the far right side of the
Information Display
PR indication.
•
Use the / Buttons
the disc, track or chapter to be edited.
•
Use the
/
change the selection.
•
Press the Clear Button
until
program step.
•
When all steps have been programmed,
and then
press the Play Button
grammed play, or the Return Button
to exit the programming function and
return to normal operation.
Bookmarks
.
Bookmarks are a feature of the DVD600 that
allows you to mark up to nine different points
on a disc and to quickly return to those points
and
/
later. The Bookmarks feature works on both
DVD and CD discs.
To Enter a Bookmark,
and then
Follow These Steps:
1. During disc playback, press the Status
Button if the Menu Bar is not already on
the screen.
2. Press the / Buttons
disc icon with the word "Mark" below it is high-
lighted in white between yellow brackets.
3. Press the Enter Button
until
Bookmark Banner.
4. At any point during playback where you wish
to mark a spot so that you may return to it later,
press the Enter Button
mark " " will appear in the box on both the
"Go To" and "Mark" lines.
5. To enter additional Bookmark points, press
the / Buttons
box on the Mark line is highlighted in black.
twice.
Press the Enter Button
6. Repeat Steps 4 and 5 for up to nine Bookmark
points on a disc.
.
47
7. To exit the Bookmark Banner, press the /
Buttons
12D only, and not
of the banner is highlighted with a yellow out-
line and the arrow and open door icons turn
53 .
from white to green. Press the Enter Button
53 again to
Button
from the on-screen display.
The marked spots will remain in the DVD600's
, next to the
12D
memory as long as the disc is not changed. The
Bookmark memory will remain active if the disc
is stopped or the unit turned off, but it will be
to select
lost if the disc is removed from the player, or if
the disc tray drawer is opened when the unit is
the Stop mode.
Buttons to
To Recall a Bookmarked Scene or
to remove a
47
Note that a check mark " " will appear in the
box on both the "Go To" and "Mark" lines.
1. During disc playback, press the Status
58 to begin pro-
Button
the screen.
2. Press the
disc icon with the word "Mark" below it is high-
lighted in white between yellow brackets.
3. Press the Enter Button
Bookmark banner.
4. Press the
the top "Go To" line of the banner is highlighted
in black with a yellow outline.
5. Press the
box below the number of the desired
Bookmarked spot is highlighted.
until the
6. Press the Enter Button
the selected point on the disc
7. To exit the Bookmark Banner, press the
to view the
Buttons
of the banner is highlighted with a yellow out-
line and the arrow and open door icons turn
from white to green. Press the Enter Button
. Note that a check
Button
from the on-screen display.
until another empty
.
until the box at the right side
to return to normal play. Press the Clear
to remove the Bookmark menu bar
47
Passage, Follow These Steps:
if the Menu Bar is not already on
Buttons until the
/
to view the
Button so that a box on
Buttons so that the
/
to go directly to
until the box at the right side
to return to normal play. Press the Clear
to remove the Bookmark menu bar
47
/
63