Table of Contents
Advertisement
Close the FST Program
NOTICE: Do not close the program by clicking on the X in the upper right of the screen.
1. Close the FST program by clicking on the Exit button at the bottom of the screen (Figure 21).
Disconnect the ECU and FST
1. Turn power to the ECU OFF per instructions in the applicable aircraft manual.
2. Disconnect the RCA plug of the ST-528 from the airframe-supplied RCA jack in the cockpit.
3. Disconnect the USB plug of the ST-530 adapter (Figure 1 in the ECU TO FST
CONNECTION chapter of this manual) from the USB port on the laptop.
Access the Field Service Tool
Page 24
TEO-540-C1A Engine Maintenance Manual
Figure 21
Exit Button
© 2022 Avco Corporation. All Rights Reserved
Field Service Tool User Manual
August 2022
Advertisement
Table of Contents
