Retrieving Data Logger Unit Information - Lycoming TEO-540 Series User's Manual And Troubleshooting Manual

NOTICE: If the data logger is not installed or not communicating with the ECU a "Data Logger
Unit was not detected" warning will be displayed (Figure 13). Check the connection
between the data logger and the ECU and correct the problem. If the problem persists,
contact Lycoming.
1. From the "Retrieve DLU Data" drop-down menu (Figure 14) select the following option:
• Run Time Data
• Trip Time Data
• Life Time Data
2. Click the OK button to start to
retrieve the selected data. The Data
Table will show streaming data
from the ECU.
NOTICE: The ECU data will be logged in a file using the following format:
• Decode • Data
Access the Field Service Tool
Page 20
Data Logger Unit Not Detected
• Year • Month
TEO-540-C1A Engine Maintenance Manual
Figure 13
Retrieve DLU Data Drop-Down Menu
• Day • Hour • Minute • Second • AM/PM
© 2022 Avco Corporation. All Rights Reserved
Field Service Tool User Manual
Figure 14
August 2022