Field Service Tool User Manual
TEO-540-C1A Engine Maintenance Manual
Data Graphing
This feature allows the user to graph runtime data and active data logged by the field service tool.
This feature can be used when the ECU is not connected (Figure 15).
1. Open the FST
program per the "Start
the FST Program"
procedure.
NOTICE: All tabs except
Info are disabled when
the FST is started with no
hardware attached.
(Figure 15)
2. Click on the "Graph
Data" button (Figure
15).
3. The program will open a separate Data Graph window (Figure 16).
© 2022 Avco Corporation. All Rights Reserved
August 2022
Open Data Folder Button
Figure 16
Data Graph Window
Figure 15
Access the Field Service Tool
Page 21