Table of Contents
Advertisement
TrainMaster Command operations
The Command Control environment
T
rainMaster Command Control is the
advanced model railroad control system
from Lionel. TrainMaster Command Control
gives you the power to operate multiple
Command-equipped locomotives on the
same track, at the same time.
Place your locomotive on Lionel or
1
1
Lionel-compatible O-31 or larger track.
• Make sure track power is OFF before placing on the track.
• Make sure your Lionel Command Base is plugged-in and its
communications wire is connected to the COMMON post on your Lionel
transformer or the U terminal on any of your installed PowerMasters.
• Once positioned on the track, increase track voltage to FULL (no more
than 19 volts). On PowerMasters, slide the CMD/CONV switch to CMD.
Address your locomotive using your CAB-1 Remote Controller.
2
2
• Press ENG and 1 on the numeric keypad of your CAB-1 Remote Controller.
This command is sent by your CAB-1 Remote Controller to the Command Base,
which then translates your command into digital code. That code is sent around
your railroad's outside rails in the form of a digital "halo." All Command-
equipped Lionel locomotives listen to this digital communication, but they do
not respond until they hear their individual ID number—in this case, "1."
• The digital language of TrainMaster Command Control—and not
track power—controls the actions of Command-equipped Lionel
engines. Track power is simply like gasoline in the tank of your car—it gives
you the power to go places, but it doesn't tell you where to go or how fast to get
there.
• All Command locomotives come factory-programmed with an ID#
of "1." To change the ID# of your locomotive, see page 14.
Move 'em out!
3
3
• Throttle up or press any command button on the CAB-1 Remote
Controller. Your locomotive will respond to your every command.
To operate in Command mode, you
need a Command Base (6-12868) and
a CAB-1 Remote Controller (6-12911).
Find them both at your authorized Lionel
retailer.
10
Advertisement
Table of Contents
