Table of Contents
Advertisement
Soliswitch FTE20
2.3
Workplace safety
For work on and with the device:
Wear the required personal protective equipment according to federal/national regulations.
►
2.4
Operational safety
Risk of injury.
Operate the device in proper technical condition and fail-safe condition only.
►
The operator is responsible for interference-free operation of the device.
►
Conversions to the device
Unauthorized modifications to the device are not permitted and can lead to unforeseeable
dangers.
If, despite this, modifications are required, consult with Endress+Hauser.
►
Repair
To ensure continued operational safety and reliability,
Carry out repairs on the device only if they are expressly permitted.
►
Observe federal/national regulations pertaining to repair of an electrical device.
►
Use original spare parts and accessories from Endress+Hauser only.
►
Hazardous area
To eliminate a danger for persons or for the facility when the device is used in the hazardous
area (e.g. explosion protection, pressure vessel safety):
Based on the nameplate, check whether the ordered device is permitted for the intended use
►
in the hazardous area.
Observe the specifications in the separate supplementary documentation that is an integral
►
part of these Instructions.
2.5
Product safety
This measuring device is designed in accordance with good engineering practice to meet state-
of-the-art safety requirements, has been tested, and left the factory in a condition in which they
are safe to operate.
It fulfills general safety requirements and legal requirements. It also conforms to the EC directives
listed in the device-specific EC declaration of conformity. Endress+Hauser confirms this fact by
applying the CE mark.
Endress+Hauser
Safety instructions
7
Advertisement
Table of Contents
