Soliswitch FTE20
4
Installation
4.1
Incoming acceptance, transport, storage
Compliance with the permitted environmental and storage conditions is mandatory. Precise
specifications are provided in the "Technical data" section (® ä 23).
4.1.1
Incoming acceptance
On receipt of the goods, check the following points:
• Is the packaging or the content damaged?
• Is the delivery complete? Compare the scope of delivery against the information on your order
form.
4.1.2
Transport and storage
Please note the following:
• Pack the device so that is protected against impact for storage and transport. The original
packaging provides optimum protection.
• The permitted storage temperature is –20 to 60 °C (–4 to 140 °F).
4.2
Installation conditions
Correct and incorrect installation positions are indicated in (® å 2, ä 10) and
(® å 3, ä 11).
The dimensions of the device are provided in the "Technical data" section (® å 18, ä 27).
Endress+Hauser
Installation
9