Related Manuals for Biosan Microspin FV-2400
Summary of Contents for Biosan Microspin FV-2400
- Page 1 Medical–Biological Research & Technologies FV-2400 Microspin Mini-Centrifuge/Vortex for versions: Operating Manual V.1AA Certificate V.1AC V.1BC V.1BA...
-
Page 3: Table Of Contents
Contents Safety Precautions General Information Getting Started Operation Specifications Maintenance Warranty and Claims Declaration of Conformity... -
Page 4: Safety Precautions
Safety Precautions The following symbol means: Caution! Make sure you have fully read and understood the present Manual before using the equipment. Please pay special attention to sections marked by this symbol. GENERAL SAFETY Use only as specified in the Operating Manual provided. ·... -
Page 5: General Information
PCR-diagnostics experiments, ecological monitoring researches and industrial biotechnology laboratories. Microspin FV-2400 provides the simultaneous mixing and separation of samples, using centrifuge and mixing modules, disposed on the common spin module. The device was invented and for the first time described (published) by Biol. Dr. -
Page 6: Getting Started
The warranty does not cover in-transit damage. 3.2. Complete set. Package contents: Standard set: Microspin FV-2400, Mini-Centrifuge/Vortex...........1 piece R-0.5/0.2M rotor for 12 x 0.5 +12 x 0.2 ml microtubes u ......1 piece R-1.5M rotor for 12 x 1.5 ml microtubes v ..........1 piece... - Page 7 Operation of Microspin Recommendation during operation Check the rotor for any signs of wear and replace if necessary. Insert EVEN number of tubes in rotor one opposite another. The opposite tubes must be filled equally. 2 TUBE 4 TUBE 6 TUBE FULL ARRANGEMENT ARRANGEMENT...
- Page 8 Fig. 1 Front panel 4.4. Long sedimentation mode (longer than 1 min). The mode is used for blood and eucariotics cells sedimentation (including micro-organism cells), dissolving of hardly soluble components or salts dense sediments in analytical researches, etc. Turn the QUICK SPIN switch (Fig.1/1) into the position I (ON). Place EVEN number of tubes to the rotor (Fig.
-
Page 9: Specifications
12 x 0.5 ml + 12 x 0.2 ml microtubes BS-010201-BK Vortex head Vortex head with 2 mm eccentric BS-010201-S04 Biosan is committed to a continuous programme of improvement and reserves the right to alter design and specifications of the equipment without additional notice. -
Page 10: Maintenance
7.3. If any manufacturing defects are discovered by the Customer, an unsatisfactory equipment claim shall be compiled, certified and sent to the local distributor address. Please visit www.biosan.lv, Technical support section to obtain the claim form. 7.4. The following information will be required in the event that warranty or post- warranty service comes necessary. -
Page 11: Declaration Of Conformity
Declaration of Conformity... - Page 12 Biosan SIA Ratsupites 7, build.2, Riga, LV-1067, Latvia Phone: +371 67426137 Fax: +371 67428101 http://www.biosan.lv Version1.05 - December 2014...
Need help?
Do you have a question about the Microspin FV-2400 and is the answer not in the manual?
Questions and answers