Related Manuals for Biosan UVT-B-AR
Summary of Contents for Biosan UVT-B-AR
- Page 1 Medical–Biological Research & Technologies DNA/RNA UV-cleaner box UVT-B-AR Operating Manual for versions: V.3AA Certificate V.3AB V.3AD V.3AE V.3A04...
-
Page 3: Table Of Contents
Contents Safety P recautions 2. General Information 3. Getting Started 4. Operation 5. Specifications 6. Technical Maintenance 7. Warranty, Reclamation Information 8. Declaration of Conformity... -
Page 4: Safety Precautions
1. Safety precautions The following symbols mean: Caution: Make sure you have fully read and understood the present Manual before using the equipment. Please pay special attention to sections marked by this symbol. Caution: Do not work in the cabinet or open the front protective screen while the open UV-lamp is switched ON. - Page 5 DURING OPERATION Do not operate the unit in environments with aggressive or explosive chemical · mixtures. Do not operate the unit if it is faulty or been incorrectly installed. · For indoor use only. · Do not use outside laboratory rooms. ·...
-
Page 6: General Information
UV recirculator consists of a UV lamp, a fan and dust filters organized in a plastic case. Operator working in a UV-cleaner box UVT-B-AR with a switched on UV recirculator is not exposed to UV radiation. It allows continuous treatment of the airflow with UV light without interrupting working process. - Page 7 • Long life UV lamps (8000 h); • Low noise level; • Low energy consumption; • Compact “bench top” model for personal labs; • Optional table with drawer T-4 (on request).
-
Page 8: Getting Started
Caution! Due to its size and weight the unit requires two people to lift or move it. 3.2. Complete set. Unit set includes: Standard set: - DNA/RNA UV-cleaner box UVT-B-AR ..........1 pce. - Spare dust filters ..................4 pcs. - A spare fuse (inside the fuse holder) .............1 pce. - Operating manual, Certificate ..............1 copy Optional accessories: - Moving table for UV-cleaner box T-4 .............1 pce. - Page 9 4.1. Plug the power cord to the grounded mains outlet. Switch ON the Power switch at the rear panel (position I). 4.1.1. Check the cable connections strength of the control block and the intermediate mains cord. 4.2. UV-exposition of the working place. Caution! Do not work in the box or opened the protective front screen while the open UV-lamp is switched ON.
-
Page 10: Specifications
(Fig.1/5). The set time of exposition is preserved in the memory. The set time won't be preserved after the complete switching off the UV-cleaner box. 4.2.5. If the set time of direct UV light exposition is 0:00, pressing the Start key unit operates continuously during 24 hrs or until the Stop/Reset key is pressed. -
Page 11: Technical Maintenance
1000 W for 230V. Optional accessories Description Catalogue number moving table with a drawer and wheel BS-040101-BK Biosan is committed to a continuous programme of improvement, specifications may locks, dimensions 800x600x745 mm be changed without notice. 6. Technical Maintenance... -
Page 12: Warranty, Reclamation Information
6.1. If service is required, disconnect the unit from the mains and contact your local Biosan representative or Biosan. 6.2. It is allowed to perform the maintenance and all types of repair operations only to the persons who have completed special training. - Page 13 7.3. If any manufacturing defects are discovered by the Customer an unsatisfactory equipment claim shall be compiled, certified and sent to the local distributor address. Please visit www.biosan.lv, Technical support section to obtain the claim form. 7.4. The following information will be required in the event that warranty or post- warranty service comes necessary.
-
Page 14: Declaration Of Conformity
8. Declaration of Conformity... - Page 16 Biosan SIA Ratsupites 7, build. 2, Riga, LV-1067, Latvia Phone: +371 6742 6137 Fax: +371 6742 8101 http://www.biosan.lv Version 3.03 – October 2013...
Need help?
Do you have a question about the UVT-B-AR and is the answer not in the manual?
Questions and answers