Application Areas; Permissible Components; Training Of Qualified Personnel; Ce Marking - Festo CMMT-AS-C2-11A-P3 Series Manual

Safety
– within the limits of the product defined by the technical data è 10 Technical data
– in an industrial environment
The safety function might fail and malfunctions might occur if you do not comply with the parameters
required for the ambient and connection conditions.
Intended use of the safety sub-functions for the product è Manual Safety sub-function.
2.2.1

Application areas

The device is intended for use in an industrial environment and with appropriate measures in commer-
cial, residential and mixed areas.
The device is intended for installation in a control cabinet. The minimum degree of protection required
for the control cabinet is IP54.
The device can be operated in TN, TT and IT systems if certain requirements are met. Detailed informa-
tion on allowed and prohibited mains types of system earthing è 7.4 Permissible and impermissible
mains types of system earthing.
2.2.2

Permissible components

If holding brakes and clamping units without certification are used, a risk assessment is required to
assess their suitability for the related safety-oriented application.
In addition to the requirements of EN 60204-1, the following requirements apply to other components
of the drive system from EN 61800-5-2:
– Annex D.3.5 and D.3.6 for motors
– Annex D.3.1 for motor and brake cables
– Annex D.3.4 for mating plugs
Components approved by Festo for the CMMT-AS fulfil these requirements.
2.3

Training of qualified personnel

The product may be installed and placed in operation only by a qualified electro technician, who is
familiar with the topics:
– installation and operation of electrical control systems
– applicable regulations for operating safety-engineering systems
Work on safety-related systems may only be carried out by qualified personnel trained in safety
engineering.
2.4

CE marking

The product has the CE marking.
The product-related EC/EU directives and standards are listed in the declaration of conformity
è www.festo.com/sp.
2.5

Safety engineering approval

The product is a safety device in accordance with the Machinery Directive. For details of the safety-ori-
ented standards and test values with which the product complies and fulfils, see è Manual Safety
sub-function, Technical data, safety engineering.
Festo — CMMT-AS-C2/3/5/7/12-11A-P3-... — 2021-12e 11