Connecting The Leica Ctr5500/Ctr6000; Electronics Box - Leica DM5500 B Operating Manual

6.11 Connecting the Leica CTR5500 or CTR6000

Electronics Box

Note:
We generally advise you not to use the Leica
CTR5500 or CTR6000 box with other mic-
roscopes. The serial no. of the matching stand
can be found on the rear side of the electronics
box.
• Plug one connector of the 25-pin cable into
the socket on the back of the microscope
(38b.2) and the other into the Microscope port
(38a.6).
Fig. 38a Rear side of Leica CTR6000
1 AC power socket
2 XY Stage socket for motorized stage
3 XYZ Control for SmartMove
4 Trigger
5 Ext socket
6 USB-interface
7 12V, max 100W for lamp power cable of the stand
8 DL: reset button
9 Microscope socket for microscope
7
6
5
4
3
2
1
• Connect the remote control element Smart-
For CTR6000 only:
• Connect the motorized stage to the socket XY-
• If the lamp power cable of the microscope
Fig. 38b Rear side of stand
1
2
3
4
8
9
Move to the socket XYZ-Control (38a.5).
Stage (38a.2).
(38b.3) has not been connected during assem-
bly, connect it now to the socket 12V, max
100W (38a.7).
Caution!
To avoid overheating of the ports, make sure
the plugs are connected properly and
screwed on tightly.
USB-interface
Connection to the Leica CTR5500 or CTR6000
electronics box
Lamp power cable of the microscope
Ext1/Ext2 sockets
1
4
2
6. Assembly
3
37