Table of Contents
Advertisement
• Gen set control
• Remote control & monitoring
• Data logging
Features
The GCP-MG gateway provides the following key features:
• Modbus/TCP protocol (Ethernet)
• Modbus RTU protocol (either RS-232 or RS-485, software configurable)
• Interfaces with up to 16 GCP-30 controls and up to 8 LS 4 controls
• Full support of Option SB03 (Cat CCM) and Option SC06 (MTU MDEC)
• Modbus register layout compatible with GW 4
• Dedicated Modbus slave ID for each GCP-30 and LS 4 control
• Large internal buffer for data
• Complete data set of one GCP-30 unit can be read with a single Modbus transaction
• Integer/Exponent value pairs for voltages, power and currents are additionally
represented as 32-bit floating point registers
• Transparent handling of data guarantees compatibility with future Woodward
firmware updates
• Serial baud rate up to 115200 bps
• Support of Modbus function codes 03, 04, 06 and 16
• Concurrently one Modbus serial line and up to two Modbus/TCP connections
• Low configuration overhead, just an IP address
• Embedded web server for easy configuration and commissioning using a web browser
• Firmware upgradeable via Ethernet
• Status LEDs for power, Ethernet link, device status and communication status
• 24 V DC (10-30 V) power supply
• DIN rail mountable
2
UMGCPMG-2201
Advertisement
Table of Contents
