Table of Contents
Advertisement
The cumulative diagnostic data is reset when the device is power cycled or reset. The
data is also reset by pressing the Clear Counter button.
Finding the firmware version and serial number
Click on the About menu entry on the menu bar to show the product information as
shown below:
Figure 5.5: About page
This product information is important for service and support inquiries. The following
product information is provided:
Product name
The name of the product.
Hardware version
GCP-MG hardware version.
Firmware version
The firmware version that is installed on the GCP-MG.
Serial number
The serial number of the GCP-MG. The serial number is specific to your device.
Configuring and commissioning
The configuration pages are accessed by clicking on the Configuration... menu entry
on the menu bar which then expands a configuration sub-menu. All configuration
settings are kept in the device' non-volatile memory.
If you make changes to any settings, remember to save each page before changing
to a different page!
26
UMGCPMG-2201
Advertisement
Table of Contents
