Scanner Parameters
Set Lengths for Codabar
Lengths for Codabar may be set for any length, one or two
discrete lengths, or lengths within a specific range. The
length of a code refers to the number of characters (i.e., hu-
man readable characters), including check digit(s) the code
contains.
One Discrete Length: This option allows you to set one
bar code length. Only bar codes of this length will be de-
coded and passed to the application.
EXAMPLE:
If you select Codabar One Discrete Length, then scan 1, 4, only
Codabar symbols containing 14 characters are decoded.
Numeric bar codes begin on page 4-87. If you make an er-
ror, or wish to change your selection, scan the CANCEL bar
code on page 2-88.
2-68
SE 1223 Scanner User's Guide
CODABAR- -ONE DISCRETE LENGTH
SECTION 2