Scanner Parameters; Introduction - Intermec SE1223 User Manual

" " " " " " "

Introduction

The SE 1223 Scanner is programmed to operate by scan-
ning appropriate bar codes based on your needs. This sec-
tion contains the bar codes necessary to program the scan-
ner for each parameter selection. The default settings for
your SE 1223 scanner are shown on page 2-4.
This section contains both the bar code to reset your scan-
ner to the defaults, and to cancel user setup entry.

Scanner Parameters

" " " " " " "
To reset the parameters use the Reset to Default Set-
"
tings bar code on page 2-4.
To cancel the setting before the last bar code is
"
scanned, use the Cancel bar code on page 2-88.
" " " " " " "
SE 1223 Scanner User's Guide
Section 2
" " " " " " "
2-1