Set Lengths For Discrete 2 Of 5 - Intermec SE1223 User Manual

Scanner Parameters

Set Lengths for Discrete 2 of 5

Lengths for Discrete 2 of 5 may be set for any length, one or
two discrete lengths, or lengths within a specific range. The
length of a code refers to the number of characters (i.e., hu-
man readable characters), including check digit(s) the code
contains.
One Discrete Length: This option allows you to set one
bar code length. Only bar codes of this length will be de-
coded and passed to the application.
EXAMPLE: If you select D 2 of 5 One Discrete Length, then scan 1, 4, only D 2
of 5 symbols containing 14 characters are decoded.
Numeric bar codes begin on page 4-87. If you make an er-
ror, or wish to change your selection, scan the CANCEL bar
code on page 2-88.
2-64 SE 1223 Scanner User's Guide
D 2 OF 5- -ONE DISCRETE LENGTH
SECTION 2