Scanner Parameters
SECTION 2
Decode UPC/EAN Supplemental
Redundancy
With Autodiscriminate UPC/EAN Supplementals selected,
this option adjusts the number or times a symbol without
supplementals will be decoded before transmission. The
range is from 2 to 20 times.
Scan the bar code below to select a decode redundancy
value. Next scan two numeric bar codes beginning on page
4-87. Single digit numbers must have a leading zero. If you
make an error, or wish to change your selection, scan
CANCEL on page 2-88.
DECODE UPC/EAN SUPPLEMENTAL REDUNDANCY
2-26
SE 1223 Scanner User's Guide