Table of Contents
Advertisement
Unit Installation with Horizontal Termination
!
Never allow the vent to run downward. This could cause high temperatures and may present the
codes.
7.
!
ensure that the termination is not recessed into the siding. The four wood screws provided should be replaced with
8. Before connecting the horizontal run of vent pipe to the vent
thimble is required for all horizontal terminations.
9.
inserting the vent pipe into the vent cap assembly.
It is important that the vent pipe extends into the vent cap at a
the vent cap.
10. Install wall thimble in the center of the framed hole and attach
Siding
Apply sealant to
all four sides
Diagram 3
Bolt horizontal top to
Screws
Wall Thimble
Center of Hole
C L
Diagram 2
Wood Screws
Diagram 4
C L
32
Advertisement
Table of Contents
