Intermec IF61 User Manual page 36

Chapter 2 — Configuring Network Settings
22
If you need to configure other network settings such as DNS
addresses and suffixes or a SYSLOG destination, see
"Configuring Common Network Settings" on page 27.
3 Click Activate Changes to save your changes and
immediately make them active.
Ethernet Settings Descriptions
Parameter Description
Enable DHCP Check this check box if you want the IF61 to get its
IP address from a DHCP server.
If this check box is not checked, you need to specify
the IP address, subnet mask, and IP router for your
network.
IP Address IP address of the IF61. The IP address has the form
x.x.x.x, where x is a number from 0 to 255.
If DHCP is enabled, the currently assigned IP
address appears in this field.
If DHCP is disabled, specify the IP address in the
entry field.
Subnet Mask Subnet mask for this network. The subnet mask has
the form x.x.x.x, where x is a number from 0 to 255.
If DHCP is enabled, the currently assigned subnet
mask appears in this field.
If DHCP is disabled, you may need to specify the
subnet mask for the network.
Router IP address of the router. The IP address has the
form x.x.x.x, where x is a number from 0 to 255.
If DHCP is enabled, the currently assigned router
address appears in this field.
If DHCP is disabled, you may need to specify the
router address for the network.
IF61 Fixed Reader User's Manual