Martin Yale my OFFICE PRODUCTS P7500 Instruction Manual page 11

Note: Paper is placed in folder
square. Paper is NOT fanned.
3. Turn the folder 'ON' by pushing the 'I'
portion of the 'I-O-II' rocker switch.
Folding should initiate.
*Note: Use MY Office Product's 300
Static Eliminator to remove static and
improve machine performance.
Also use MY Office Products 200 Rubber
Roller Cleaner for better folding
performance and longer roller life.
Hand-Feeding of Sheets
(Mandatory for folding multiple sheet sets of paper.)
1. To prevent jams, remove all paper from the Paper Tray before feeding sets by
hand.
2. For feeding sets of up to 3 sheets (stapled or unstapled), first square the paper
against a tabletop.
3. Place the paper into the manual feed slot on the top of the machine (as shown
in Figures 13 and 14 above). Do not install multiple sheet sets in the Feed Table;
a jam will result.
Manual feed slot is used for
multiple sheet sets of paper.
Folder feeds the top sheet. Only
the top sheet should be in contact
with the feed wheel.
Figure 13: Side view of paper loaded
11
Figure 14