Paper Jamming
1. If feeding by hand, make sure that there is no paper in the Paper Tray.
2. Re-align the Paper Guides and check Fold Table settings.
3. Check to see if paper is within specifications (8.5" x 11" or A4, 16-28 lb. bond or
68-90 gsm).
4. Remove top cover and clean rollers with the MYOP 200 Rubber Roller Cleaner.
5. Use MYOP 300 Static Eliminator to remove static in paper.
Paper Misfeed
1. If the paper guides are too tight or not parallel to each other, adjust the paper
guides as described in "Aligning the Paper Guides" section of this instruction
manual.
2. If feeding by hand, make sure the paper is properly aligned before placing it in
the slot.
3. If feeding by hand, place the set in the slot before turning the machine on.
4. Re-align the Paper Guides.
5. Check to see if paper is within specifications (8.5" x 11" or A4, 18-24 lb. bond or
68-90 gsm).
6. The feed tire could be worn. Replace.
Troubleshooting
13