Verifying The Printer Is Working - Intermec EasyCoder PL4 Quick Start Manual

Tear-Off mode
Media
cover
Latch
assembly
The printer advances the media to the next label, if printing
labels. If you are printing on continuous media, the printer will
advance a short strip of media and will then be ready for
printing.

Verifying the Printer Is Working

Before you connect the printer to your computer or portable
data terminal, make sure that the printer is in proper working
order. You can do this by printing a configuration label using
the next procedure. If you cannot get this label to print, see the
EasyCoder PL4 Printer User's Guide.
To print a configuration label
1 Turn the printer off. Load the media compartment with
continuous media (media with no black marks or gaps). The
printer shipped with a sample roll of continuous media.
2 Press and hold the Feed button.
3 Press and release the Power button and keep the Feed button
pressed. When printing starts, release the Feed button.
EasyCoder PL4 Printer Quick Start Guide
Self-Strip mode
Media
cover
Latch
PL4U044.eps
assembly
17