Intermec EasyCoder PL4 Quick Start Manual page 14

The PL4 printer supports direct thermal receipt, label, or tag
media.
Note: To print a configuration label, you need to
load continuous media (media with no black marks
or gaps) into the printer. The printer shipped with a
sample roll of continuous media. For help printing a
configuration label, see "Verifying the Printer Is
Working" later in this guide.
To load the media
1 Press the latch release button on the side of the printer. The
latch assembly flips open automatically.
2 Rotate the media cover back to expose the media
compartment and the adjustable media supports.
14
PL4Q011.eps
EasyCoder PL4 Printer Quick Start Guide