Intermec EasyCoder PL4 Quick Start Manual page 18

The printer prints a line of interlocking "x" characters to make
sure all elements of the printhead are working, prints out the
version of software loaded in the printer, and then prints two
reports.
The first report indicates model, firmware version, serial
number, baud rate, and other printer information. The second
report prints out a print quality test and then more detailed
information on the printer's configuration and parameter
settings. If no second report appears, there is no application
loaded. The following illustrations are examples of the first
report followed by the second report.
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
Intermec PL4 V79.40 12/23/02
CHK: FFFF
HTSE7940 /18
Testing Memory...
Memory tested and OK
Baud Rate: 19200 BPS
In-activity Timeout: 120 Secs
Low battery Shut-down: 170
End of report.
Example of the first report of the configuration label
18
Printhead test
EasyCoder PL4 Printer Quick Start Guide