Intermec EasyCoder PF8 Install Manual page 7
Cutter
Hide thumbs
Also See for EasyCoder PF8:
- User manual (62 pages) ,
- Quick start manual (2 pages) ,
- Programmer's reference manual (180 pages)
Advertisement
Plug the cutter connector into the cutter socket.
Note: There are two sockets on the board, one is for the stripper
and the other is for the cutter. Check the pin configuration of the
socket before plugging in the connector.
Put the cutter in the front cover space. First, insert the left side of the
cutter module and then the right side.
Advertisement
