Henny Penny Velocity PXE 100 Kit Instructions page 19

Bulk oil instructions including selector valve and controls

Hide thumbs Also See for Velocity PXE 100:

Kit Instructions

45. Secure wires with zip ties where needed.

46. Reattach the side panels and place the ATO and condensate boxes back in the proper location.

47. After completing the hardware installation, you will need to enable these features in the control.

Connect main circuit breaker or cord at wall outlet to supply power.

Complete the Software Settings

48. With power switch in either OFF or ON position, press and hold the Menu button to activate the MAIN

menu. Once *MAIN* flashes on the screen, release the Menu button.

48. After the options appear, press the menu button again to scroll to the next set of options. Press The

Tech Mode button and then type the code 11221122.

49. Navigate through the options and change the settings as necessary. Below are some of the key features.

Page 19 of 21

Velocity oxe 100